Overview
Range
- Flow: up to 70000 m³/h
- Head: up to 300 m
- Sizes: 100 to 2800 mm
Applications & Services:
Applications & Services:
- Cooling Water
- Intake Pumps
- Water, Sewage & waste water treatment
- Dock Drainage
- Flood Control
- Fire service
- Irrigation / Lift Canal
- Water Supply
- Booster Service
- Dewatering
- General Purpose
Construction & popular option:
Construction & Popular Option:
- Vertical single or multistage centrifugal pumps for wet or dry pit installation with radial or mixed or axial flow impellers.
- High efficiency impellers are either enclosed or semi-open mounted on amply designed shaft and supported with adequate bearings.
- Pull out / non-pull out design
- Self water lubrication / oil / forced water lubrication.
- Suitable for vertical solid shaft / hollow shaft motors
- Pump delivery above / below pump floor
- With / without non reverse ratchet
- With antifriction / tilting pad type thrust bearing
Material Of Construction For Components:
GENRAL INFORMATION for MATERIAL OF CONSTRUCTION
Part description | Material of Construction | |||||
Casing / Bowl | Cast Iron / Ni. CI./Cast Steel / Stainless Steel / Duplex SS / Super Duplex SS/ Ni.-Resist / ---- | |||||
Impeller | Cast Iron / Bronze / Cast Steel / Stainless Steel / Duplex SS / Super Duplex SS/ Ni.-Resist ---- | |||||
Shaft | Carbon Steel / Stainless Steel / Duplex SS / Super Duplex SS ---- | |||||
Wearing Ring | Cast Iron / Bronze / Cast Steel / Stainless Steel / Duplex SS / Super Duplex SS/ Ni.-Resist ---- | |||||
Shaft Sleeve | Carbon Steel / Stainless Steel / Duplex SS / Super Duplex SS / ---- | |||||
Bush Bearing | Bronze / Cutless Rubber / Thordon / Feroform / Green Tweed / ---- | |||||
Material standards & grades | ||||||
MOC | Indian | U.S. | DIN | British | ||
Cast Iron | IS 210, Gr. FG 260 | ASTM A48, CL. 35 or 40 | 1691 GG 25 | BS EN 1561-GJL 250 | ||
Cast Iron with Ni. | Normally gives 1.5% Ni. -------------------------------- Other percentage can give if desired ---------- | |||||
Bronze | IS 318, Gr. LTB 2 | ASTM B62, B145 Alloy4A | CuSn5ZnPb | BS EN 1982-CC491K | ||
ASTM B584 – C83600 | BS1400 LG2-C | |||||
Phosphor Bronze | IS 28, Gr. 1 | |||||
Aluminum Bronze | IS 305, Gr. AB1 | ASTM B 148 (9A) | UNS No. C95200 | |||
Carbon Steel (Castings) | IS 1030, Gr. 230-450W | ASTM A216, Gr. WCB | ||||
Stainless Steel (Castings) | IS 3444, Gr. 10 | ASTM A743, Gr. CA15 | 1.4106(X12Cr14) | |||
IS 3444, Gr. 24 | ASTM A743, Gr. CA6NM | 1.4313(X3CrNiMo13-4) | 425 C 11 | |||
IS 3444, Gr. 1 | ASTM A743, Gr. CF8 | |||||
IS 3444, Gr. 1 | ASTM A351, Gr. CF8 | 1.4308 | EN 10213-4 1.4308 | |||
IS 3444, Gr. 4 | ASTM A743, Gr. CF8M | |||||
IS 3444, Gr. 4 | ASTM A351, Gr. CF8M | 1.4408 | EN 10213-4 1.4408 | |||
IS 3444, Gr. 15 | ASTM A 743, Gr. CF3 | |||||
IS 3444, Gr. 15 | ASTM A 351, Gr. CF3 | 1.4309 | EN 10213-4 1.4309 | |||
IS 3444, Gr. 16 | ASTM A743, Gr. CF3M | |||||
IS 3444, Gr. 16 | ASTM A351, Gr. CF3M | 1.4409 | EN 10213-4 1.4409 | |||
Duplex SS & Super Duplex. Casting) | ASTM A890, Gr. 1B UNS No. J93372 CD4MCuN | |||||
ASTM A890, Gr. 1C UNS No. J93373 CD3MCuN | ||||||
ASTM A890, Gr. 2A UNS No. J93345 CE8MN | ||||||
ASTM A890, Gr. 3A UNS No. J93371 CD6MN | ||||||
ASTM A890, Gr. 4A UNS No. J92205 CD3MN | ||||||
ASTM A890, Gr. 5A UNS No. J93404 CE3MN | ||||||
Carbon Steel (Bars) | IS 1570(P-III), Gr. 40C8 | ASTM A107, Gr. 1040 | BS 970(En-8)/080M40 | |||
IS 1570(P-III), Gr. 55C8 | AISI 1055 | CK55 | BS 970(En-9)/070M55 | |||
Stainless Steel (Bars) | IS 1570(P-V), Gr.X12Cr12 | ASTM A276, Type 410 | 1.4006 (X10Cr13) | 410 S21 | ||
IS 1570(P-V), Gr.X15Cr16Ni2 | ASTM A276, Type 431 | 1.4057 (X20CrNi17) | ||||
ASTM A276, Type 304 | 1.4301 (X5CrNi18 10) | 304 S15 | ||||
IS 1570(P-V), Gr.X04Cr17Ni12Mo2 | ASTM A276, Type 316 | 1.4401 (X5CrNiMo17122) | 316 S31 | |||
IS 1570(P-V),Gr.X02Cr17Ni12Mo2 | ASTM A276, Type 316L | 1.4404 (X2CrNiMo17122) | 316 S11 | |||
Duplex SS (Bars) | ASTM A276, UNS S31803 | 1.4462 (X2CrNiMoN22 5) | ||||
ASTM A276, UNS S32760 | 1.4501(X3CrNiMoN25 7) | |||||
Steel (Plates) | IS: 2062 (Fe 410 WA) | ASTM A283, Gr. D | 1700 Gr ST 4-2 Fab. Steel 4-4 |
Coverage Chart
Notes:
- The above curves are approximate and meant for tentative selection. For details, individual pump family curves must be referred to.
- Our ranges also includes pumps for higher capacities and heads for which please refer to us.
- Due to continuous design improvements being implemented. We reserve the right to change the above without notice.
-
Product Catalogue
Vertical Turbine Pumps -
O & M Manual
Vertical Turbine Pumps